Back to Blog
How-to Guides 2026-11-17 PETKIT | Auto Litter Box, Smart Feeder, Water Fountain 0 views

EverSweet Solo 2 Fountain: Filter and Pump Care Schedule

EverSweet Solo 2 Fountain: Filter and Pump Care Schedule

A practical care schedule for the EverSweet Solo 2: when to clean the pump, how to use the app's low-water alert, and what the 2L capacity means for filter and pump upkeep.

Why the pump, not just the filter, sets your schedule

The EverSweet Solo 2 uses a wireless pump 3.0 with anti-dry-burning protection, and PETKIT specifically recommends dismantling and cleaning the pump regularly to extend its life. That makes pump care the backbone of your maintenance routine, not an afterthought to filter changes. The supplied information does not specify a filter replacement interval, so treat filter changes as condition-based and pump cleaning as the habit you build first.

The fountain holds 2L, which gives you a useful baseline: the app will remind you when the water level is low, so you can top up before the pump runs dry. The detachable body and base let you separate the fountain for cleaning without getting the charging base wet.

A simple weekly and monthly care sequence

These steps follow the supplied operating and cleaning guidance. Adjust frequency to how many pets you have and how quickly the 2L reservoir empties, but keep the pump cleaning as the anchor.

  1. Check the app status and water level: Open the PETKIT app via Bluetooth to see the fountain status. The app reminds you when the water level is low, so top up the 2L capacity before it gets low enough to affect pump operation.
  2. Separate the fountain body from the base: The detachable design lets you lift the fountain body off the base. Do this before cleaning or topping up so the charging base stays dry.
  3. Dismantle and clean the pump: PETKIT recommends dismantling and cleaning the pump regularly. A thorough pump cleaning can help with weakened or no water flow and with a pump that has become noisy.
  4. Reassemble and confirm flow: After cleaning, reassemble the pump and fountain body, refill to the 2L capacity, and check that water flows normally. If flow is still weak, repeat the pump cleaning before assuming a fault.

What the EverSweet Solo 2 record confirms

  • EverSweet Solo 2 Pet Water Fountain: Wireless pump 3.0 with anti-dry-burning protection and quiet operation below 20dB. Quiet operation is a baseline you can use to notice when pump cleaning is overdue, since a noisy pump is one of the supplied signs that cleaning is needed.
    EverSweet Solo 2 Pet Water Fountain
    EverSweet Solo 2 Pet Water Fountain
  • EverSweet Solo 2 Pet Water Fountain: 2L capacity with app-based low-water reminders via Bluetooth. The reminder helps you keep water above the level where the pump would otherwise run dry, supporting the anti-dry-burning feature.
  • EverSweet Solo 2 Pet Water Fountain: Detachable fountain body and base, with no wires on the pump or fountain body; only one USB power cable on the base. Separation makes routine cleaning safer and keeps the charging base dry. Note that a 5V 1A USB power adapter is not included.
  • EverSweet Solo 2 Pet Water Fountain: Multi-layer filtration filters hair and dust and removes odor and heavy metals. This is the filtration benefit the filter supports, but the supplied record does not give a replacement interval, so monitor condition rather than counting days.

How to tell when the pump needs attention before the schedule says so

The supplied guidance links two symptoms to a dirty pump: weakened or no water coming out, and a pump that has become noisy. If either appears, clean the pump thoroughly rather than waiting for the next scheduled cleaning. Because the pump is wireless and the fountain body has no wires, you can remove and clean it without disconnecting anything from the base beyond lifting the body off.

The app's low-water reminder is your other early warning. If the fountain runs below the usable level, the anti-dry-burning feature is designed to protect the pump, but keeping water in the 2L reservoir is still the simplest way to avoid unnecessary strain.

Filter changes: what the record does and does not tell you

The EverSweet Solo 2 uses a multi-layer filtration system that filters hair and dust and removes odor and heavy metals. The supplied information does not state a filter replacement interval or a filter model name. That means you should inspect the filter during each pump cleaning and replace it when you see visible debris buildup or reduced flow that cleaning does not fix, rather than following a fixed calendar.

  • Inspect at every pump cleaning: Since pump cleaning is the regular task, use that moment to check the filter for hair and dust accumulation.
  • Replace when condition warrants: The record confirms what the filter does, not how long it lasts. Base replacement on visible condition and flow, not on an invented schedule.
  • Keep the pump clean first: Weak flow can come from either a dirty pump or a loaded filter. Clean the pump thoroughly first, as PETKIT recommends, then reassess the filter.

Where the supplied information stops

The record does not include a recommended cleaning frequency beyond 'regularly,' a filter replacement interval, or a step-by-step pump disassembly procedure. It also does not specify which pets or sizes the fountain suits beyond the 2L capacity. Use the app reminders and the symptom-based checkpoints above, and consult the full manual for disassembly details if you need them. The 5V 1A USB power adapter is not included, so confirm you have one before setup.

Related Articles

Customer Service
Home
Products
Cart
Profile