Back to Blog
How-to Guides 2026-11-16 PETKIT | Auto Litter Box, Smart Feeder, Water Fountain 0 views

Purobot Max Pro 2 + Fence 2.0: Setup for Less Litter Tracking

Purobot Max Pro 2 + Fence 2.0: Setup for Less Litter Tracking

Set up Fence 2.0 with your Purobot Max Pro 2 to cut litter tracking. See what the fence can and cannot do, plus a practical install check before you buy.

Start with the box, not the fence

Fence 2.0 is an add-on, and its job is to reduce how much litter your cat carries out of the box. Before you install it, make sure your Purobot Max Pro 2 is already set up and your cat is using it comfortably. The box is designed with a larger entry for added comfort, so the fence should work with that opening rather than narrow it in a way that discourages entry.

The supplied product information for the Purobot Max Pro 2 does not include Fence 2.0 installation steps or compatibility dimensions. That means the exact fitting procedure is not confirmed here. Use the steps below as a practical framework, and check the fence packaging or PETKIT support for the final fit.

What the Purobot Max Pro 2 record confirms

  • PETKIT Purobot Max Pro 2 Automatic Cat Litter Box: Designed with a larger entry for added comfort, it combines an AI-powered camera and precision weight sensors to accurately monitor litter box usage and urinary health. The larger entry is the feature most relevant to fence fitting. A fence that blocks or narrows this entry could affect your cat's willingness to use the box.
    PETKIT Purobot Max Pro 2 Automatic Cat Litter Box
    PETKIT Purobot Max Pro 2 Automatic Cat Litter Box
  • PETKIT Purobot Max Pro 2 Automatic Cat Litter Box: Advanced multi-cat facial recognition tracks each cat individually, making it ideal for multi-cat households. In a multi-cat home, a fence that one cat tolerates may be avoided by another. Watch each cat's behavior after installation.

A practical Fence 2.0 fitting sequence

These steps assume the fence is designed to sit at or near the entry of the Purobot Max Pro 2. Because the supplied record does not include fence-specific instructions, treat this as a careful trial rather than a manufacturer procedure.

  1. 1. Place the box on a stable, level surface: The Purobot Max Pro 2 uses precision weight sensors to monitor usage. A stable base helps those sensors work consistently, and it also keeps the fence from shifting.
  2. 2. Dry-fit the fence before securing anything: Hold or lightly rest Fence 2.0 at the entry to see how it aligns with the box opening. Do not force clips or adhesive until you are sure the fence sits flush.
  3. 3. Check the entry clearance: The Purobot Max Pro 2 has a larger entry for comfort. Confirm the fence does not reduce that opening to the point where your cat has to squeeze through.
  4. 4. Secure the fence according to its own instructions: The supplied record does not describe how Fence 2.0 attaches. Follow the fence's included instructions for clips, adhesive, or slot fitting rather than improvising.
  5. 5. Watch the first few days of use: The box's camera and weight sensors can show whether your cat is still entering and using the box normally. If usage drops, remove the fence and reassess.

What Fence 2.0 can and cannot do for tracking

A fence is one part of a litter-tracking routine, not a guarantee. The supplied information does not include test data on tracking reduction, so the points below are practical expectations rather than measured claims.

  • It can catch litter at the exit: A fence at the entry gives litter a chance to fall back into the box before your cat steps onto the floor.
  • It cannot change your cat's litter habits: If your cat kicks litter high or exits quickly, some tracking will still happen. The fence is a barrier, not a training tool.
  • It may not suit every cat: Shy or older cats can be put off by a new barrier at the entry. The Purobot Max Pro 2's larger entry is a comfort feature, so avoid undoing that benefit.
  • It works best with a mat outside: A fence and a textured mat address different parts of the problem. The fence reduces what leaves the box; a mat catches what reaches the floor.

Fence 2.0 alone vs. fence plus a tracking mat

The Purobot Max Pro 2 record does not include a tracking mat, so this comparison is about setup choices rather than two PETKIT products.

  • Fence 2.0 alone: Best if your cat exits calmly and most litter stays near the box. Lower setup effort, but litter that clears the fence still reaches the floor.
  • Fence 2.0 plus a mat: Best if you already see litter a step or two from the box. The fence handles the exit, the mat handles the landing zone. More floor space needed.

Checkpoints after installation

The Purobot Max Pro 2's monitoring features give you useful signals. Use them as checkpoints, not as veterinary advice.

  • Usage frequency: The AI-powered camera and weight sensors monitor litter box usage. A sudden drop after fitting the fence is a reason to remove it and try again later.
  • Multi-cat fairness: In a multi-cat household, facial recognition tracks each cat individually. Check that every cat is still entering, not just the boldest one.
  • Fence stability: A fence that shifts or falls off is a hazard and can affect the box's weight readings. Re-secure it or remove it.

When to skip Fence 2.0

If your cat is anxious, elderly, or has shown reluctance to use an enclosed box, a fence may add friction rather than help. The Purobot Max Pro 2 is designed for cats of all sizes, and its larger entry is part of that design. A fence that compromises the entry works against the box's main comfort feature.

Also skip the fence if your tracking problem is mostly litter stuck to paws rather than litter kicked out at the entry. In that case, a mat and a litter that suits your cat are more direct fixes. The supplied information does not identify which litter types work best with Fence 2.0, so test with your current litter.

Related Articles

Customer Service
Home
Products
Cart
Profile