How to Replace the Wireless Water Pump in Your PETKIT Fountain
By PETKIT | Auto Litter Box, Smart Feeder, Water Fountain | Published: 2026-10-24
Category: How-to Guides
Learn how to replace the wireless water pump in your PETKIT fountain, including signs it needs replacement and step-by-step instructions for a smooth swap.
Quick Answer
You can replace the wireless water pump in your PETKIT fountain in about five minutes. Turn off the fountain, remove the old pump, install the new one, and run a rinse cycle to confirm proper water flow.
When to Replace the Pump Instead of Just Cleaning It
A pump that is clogged or noisy often just needs a deep clean, but if you notice a persistent grinding sound, weak water flow, or the pump stops working after cleaning, it's time for a replacement. The PETKIT Wireless Water Pump FFT1-2 (UVC) is designed to fit the EverSweet Max 2 (UVC) fountain, so check compatibility before buying.
Replacing the pump is also a good opportunity to upgrade to the UVC model if you're using an older pump. The UVC feature helps inhibit harmful bacteria, which is a nice bonus for your pet's hydration.
Step-by-Step Replacement Guide
- Turn Off and Unplug the Fountain: Switch off the fountain and unplug it from the power source. Remove the water tank and empty any remaining water to prevent spills. Always unplug before handling any electrical parts.
- Remove the Old Pump: Locate the pump inside the fountain basin. Gently pull it out of its housing, noting how the tubing and any connectors are attached. Disconnect the tubing carefully. Take a photo before removing to help with reinstallation.
- Install the New Pump: Place the new PETKIT Wireless Water Pump FFT1-2 (UVC) into the same position. Reconnect the tubing and ensure the pump sits flat and secure in its housing. Double-check that the pump is fully seated to avoid vibration noise.
- Refill and Rinse: Refill the fountain with fresh water, plug it back in, and let it run for a few minutes. Check for steady water flow and any leaks. If the flow is weak, check for air bubbles and tilt the pump slightly to release them.
- Clean the Pump Regularly: To extend the life of your new pump, clean it every two to four weeks by gently brushing the impeller and inlet to remove hair and debris. Consistent cleaning prevents clogs and keeps the pump running quietly.
Product Facts
- Wireless Water Pump FFT1-2 (UVC): The PETKIT Wireless Water Pump FFT1-2 (UVC) is a wireless pump designed for the EverSweet Max 2 (UVC) Pet Water Fountain. This ensures a perfect fit and easy installation without the need for extra adapters or cords.
Wireless Water Pump FFT1-2 (UVC) - Wireless Water Pump FFT1-2 (UVC): It features short-wavelength UVC disinfection that can inhibit up to 99.96% of harmful bacteria while maintaining safe, consistent water flow. This helps keep the water cleaner between filter changes, promoting better hydration for your pet.
