Purobot Max Pro 2 Double Bundle: Maintenance and Cleaning Schedule

Quick Answer

For the Purobot Max Pro 2 Double Bundle, a weekly wipe-down and monthly deep clean of each unit will keep the AI sensors accurate and odors under control. Stagger the cleaning days so both boxes are never out of service at the same time.

Step-by-Step Cleaning Schedule for the Double Bundle

1. Daily: Quick visual check and waste bin empty: Each morning, glance at both units to confirm the waste bin isn't full and the litter level is adequate. Empty the waste bin when it reaches the fill line. Common mistake: waiting until the bin is overflowing—this can trigger a sensor error and stop the cleaning cycle. Set a phone reminder to check bins at the same time each day.
2. Weekly: Wipe down the interior and sensors: Power off the unit and remove the waste bin. Use a soft, damp cloth (no harsh chemicals) to wipe the interior walls, the camera lens on the top panel, and the weight sensor area at the bottom. Dry with a lint-free cloth. Common mistake: using paper towels that leave lint on the camera lens, which can blur the AI image. Use a microfiber cloth for the camera lens to avoid streaks.
3. Monthly: Deep clean the drum and waste bin: Remove the litter drum and empty all litter. Wash the drum and waste bin with warm water and mild dish soap. Rinse thoroughly and let them air-dry completely before reassembling. Common mistake: reassembling while parts are still damp, which can cause odor or mold in the waste compartment. Schedule deep cleaning for both units on different weekends to keep one box operational.
4. Every 3 months: Check and clean the carbon filter: Locate the carbon filter (usually behind a small door on the waste bin or unit base). Remove the filter and tap out loose debris. If it's reusable, rinse it gently; if it's disposable, replace it according to the manufacturer's instructions. Common mistake: forgetting to replace disposable filters, which reduces odor control over time. Mark your calendar for quarterly filter checks.
5. As needed: Reset the unit after a sensor error: If the unit stops mid-cycle or shows a sensor error, power it off for 30 seconds and then turn it back on. If the error persists, check for obstructions (e.g., litter clumps stuck near the drum) and clean the sensor area. Common mistake: assuming the unit is broken when it only needs a simple reset or cleaning. Keep the user manual handy for error code explanations.

Product Facts

• Purobot Max Pro 2 Double Bundle: The Purobot Max Pro 2 features an AI-powered camera and precision weight sensors to accurately monitor litter box usage. Keeping the camera lens and sensor area clean is essential for accurate health tracking—a quick weekly wipe prevents false readings.